Oregon® R34 Micro-Lite™ 90SG Replacement Saw Chain, 34 Drive Links, 8"

Oregon® Micro-Lite™ 90SG Replacement Cutting Chain is made for small saws and features a chamfer-chisel cutter design that outcuts competitive chains. 90SG cuts a narrow kerf, requiring less power from the saw than standard chains to make the same cut. Micro-Lite™ 90SG is a low-vibration/low-kickback chain which meets both the ANSI (U.S.) and CSA (Canadian) low-kickback requirements. This chain is ideal for homeowners or consumer users, and is equally well suited for commercial cutters such as arborists and orchardists. Micro-Lite™ 90SG is designed for use on electric saws with bars up to 16" (41 cm), and on small gasoline-powered saws up to 2.5 cubic inches (41cc) with bars up to 14" (35 cm). 90SG is compatible with all existing 91-type drive sprockets, and its narrow .043" gauge requires the use of a Micro-Lite™ bar. 90SG chain is part of a Micro-Lite™ narrow-kerf cutting system that requires less power from the saw to cut than standard cutting systems.

• Low-kickback chain
• Low-vibration chamfer-chisel cutters have an angular shape with twin cutting corners for excellent performance and edge-holding durability
• Narrow .043" gauge helps reduce the weight of the bar-chain combination approximately 15%
• Always install 90SG chains on a .043" gauge Micro-Lite™ bar (MLE part numbers) to obtain all the advantages of the Micro-Lite™ system. 90SG chain does not fit .050" gauge bars intended for 91-series chains
• Top-plate witness mark makes accurate sharpening easier
• LubriLink™ tie straps help keep oil where it's needed - on the chain
• Vibe-Ban™ chassis design reduces vibration 25% or more at the chainsaw's handles
• LubriWell™ oil holes help carry oil around the full length of the guide bar's groove.
• Micro-Lite™ is the name for our "narrow-kerf" chain-and-bar cutting systems. Cutting a narrower kerf allows your saw to cut faster and more efficiently. Use a Micro-Lite™ chain in team with a Micro-Lite™ bar for maximum results.
• Vibe-Ban™ is the name for our family of "low-vibration" chains, designed and built with features that will reduce the risk of vibration-related injury.
• A tie-strap reservoir and a drive-link hole, respectively. These simple features help keep oil where it's needed and improve the lubrication of your bar and chain for better performance and longer life.
• Outstanding performance, fast and efficient cutting
• Excellent stay-sharp
• Smooth feel during use, smooth cut surfaces
• Reduces the tendency of saws to "skate"
• Reduces the risk of vibration-related injury
• Less power is required to make the same length of cut
• Helps the saw cut faster
• Less power is required to drive the chain
• Lighter weight, helps minimize user fatigue*
• Improved chain and bar lubrication, helps keep oil drive links where it's needed, reduces volume of oil required
• Makes sharpening easier
• Low kickback, meets ANSI and CSA standards
• Stabilizes the cutter for faster smoother cutting
• Identifies 90SG as a low-vibration chain
• Indicates the proper chain-cutting direction
• Makes it easier to hold the file at the correct angle during sharpening
• Makes it easy to break 90SG chain from reels
• Helps reduce stretch.

Shipping calculated at checkout. Usually ships within 24 hours.

We ship within the contiguous United States.

Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.