Charlotte CTT-00100-1200 ConnecTite PushFit Schedule 40 Hub PVC DWV Coupling, 3"

ConnecTite fittings are for drain, waste and vent (DWV) purposes only. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140 degree F. ConnecTite fittings are used to make quick, easy and reliable connections. Unlike solvent cement fittings, they do not utilize solvent cement or primer, thereby eliminating the mess from purple primer and the hazardous waste disposal of out-of-date cans of cement. In addition, ConnecTite fittings can be repositioned, minimize down time and are compatible with both ABS and PVC.

• Schedule 40, Hub PVC DWV coupling
• Offer quick installation
• With no tools or solvent cement needed
• Compatible with PVC and ABS pipe
• Can be reused and repositioned
• Environmentally friendly because no primer or cement is used
• Used in gravity fed waste elimination systems
• For non-pressure applications where the temperature will not exceed 140 degrees Fahrenheit.
• ConnecTite's patented lock ring ensures connection is secure
• Rubber gasket creates a tight seal
• High-quality molded Schedule 40 fitting body.
• Compatible with PVC and ABS
• No solvent cement or primer needed
• No tools required
• Can be repositioned and reused
• Standard DWV diameters
• Remodel projects
• Plumbing repairs
• Venting
• PVC DWV plumbing systems
• ABS DWV plumbing systems.
• ConnecTite joints are over 20 times faster to install than a solvent cement joint.
• ConnecTite fittings have no cure time. In comparison, a 2" solvent cement joint has a minimum cure time of two hours before it should be tested.
• This allows a DIYer to quickly complete their DWV project with ConnecTite fittings and then spend their time doing something more enjoyable.
• Better for human health and safety
• More environmentally friendly - ConnecTite contains no Volatile Organic Compounds (VOCs).
• Eliminates confusion over which solvent cement to use
• Eliminates the hazardous waste disposal of out-of-date cans of cement and primer
• No mess - Spilling purple primer is almost inevitable, especially for a DIYer. When this happens, there is no way to clean it up. This is of particular concern if you are making a solvent cement joint in a finished area.
• With a ConnecTite fitting you can simply twist the fitting into proper alignment.
• This is helpful when you are using a fitting with a bend (90 degree Elbow, 45 degree Elbow or Sanitary Tee).
• If you have a misaligned fitting with solvent cement, the only option you have is to cut out the joint and start completely over.
• If pipe is cut too short or too long, you can remove the pipe from the ConnecTite fitting, cut your pipe to the correct length and then reuse the same ConnecTite fitting up to three times.
• Again, with solvent cement your only option is to cut out the joint and start completely over.
• ConnecTite fittings can be used as a transition fitting as it works with Schedule 40 OD plastic pipe.
• Unlike push fit pressure fittings, ConnecTite fittings do not require a tool for reversal.
• ConnecTite fittings will fit in the same places as a solvent cement fitting of the same diameter.
• Like all Charlotte Pipe products, ConnecTite fittings are made in the USA.

Shipping calculated at checkout.

Returns accepted within 30 days by mail. Return shipping is paid by the customer. See our refund policy.